FiTech 50004 Force Fuel System

Description: The sturdy, versatile mounting bracket provides a side or bottom mount, Designed specifically to fuel FiTech EFI systems as well as other brands, Uses a 340 LPH fuel pump and internal regulator for reliable fuel supply, It is capable of supporting the fuel demands of an 800-hp engine on gasoline, Has an increased fuel capacity over other systems with no chance of cavitation FiTech 50004 Force Fuel System Sku # 52150004 Mfr. Part # 50004 Condition New Brand FiTech Sold Each Details Info The all-new FiTech Force Fuel System makes the upgrade to fuel injection even easier! The Force Fuel simply connects to a stock mechanical or electric fuel pump then supplies the EFI system with high pressure through the use of an internal 340-LPH pump. This means you don’t need to run a new feed line from the tank! With a strong, versatile mounting bracket, the Force Fuel System mounts under and is fed with the original fuel pump. The assembly holds half-a-gallon of fuel to submerge the electric fuel pump to keep it cool for long life and no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58-psi which is ideal for reliable EFI performance. A serviceable 10-micron fuel filter is supplied to keep the finest debris away from the injectors along with five feet of high-pressure fuel hose, AN fittings, and clamps. The precision machined extrusion is designed for strength and sealed tight. There is also an easy-to-view fuel pressure gauge installed for quick checks and heavy-duty wire terminals are also supplied to complete the installation. Designed specifically to fuel FiTech EFI systems as well as other brands Capable of supporting the fuel demands of an 800-hp engine on gasoline Sturdy, versatile mounting bracket provides a side or bottom mount Effective 10-micron serviceable filter ensures the best filtration available Uses a 340 LPH fuel pump and internal regulator for reliable fuel supply Increased fuel capacity over other systems – no chance of cavitation Supplied with high-pressure fuel hose, AN fittings, return line fitting bung, and liquid-filled gauge For use with E-85, alcohol or methanol based fuels Specs Sold in Quantity Each Color Black Material Type Billet Aluminum Inlet Quantity 1 Outlet Quantity 1 Gasket(s) Included No Fuel Filter Included Yes Wiring Harness Included No Fittings Included Yes Fuel Line Included Yes Fuel Pressure Regulator Included No Sending Unit Included No Mounting Bracket Included No Voltage 12 Fuel System Type EFI Application Universal Bracket Color Black Mounting Hardware Included No Inlet Attachment Female O-ring Outlet Attachment Female O-ring Regulator Required Yes MFG. Part # 50004 Electric Fuel Pump Type External Electric Fuel Pump Inlet Fitting(s) -6 AN Electric Fuel Pump Outlet Fitting(s) -6 AN Horsepower Rating (Naturally Aspirated) 800 HP Free Flow Rate 90 GPH / 340 LPH Inline Yes Fuel Type Gasoline | Alcohol | E85 | Methanol Maximum Pressure 58 Reviews Great product Rated by Hotroder on July 13, 2021 Summary: This worked as I expected. Yes, I recommend this product. FiTech Install on 1977 Corvette Rated by Girlfriends 77 Corvette on August 05, 2020 Summary: This was installed into a 1977 Corvette with the 400HP FiTech 30003 EFI kit. The efi installed easily with easy to follow instructions. This vehicle had electric fans and A/C. The electric fan connection installed easily. You connect the efi yellow wire to the relay. I used the relay coming from the temperature sensor and eliminated that sensor. For the A/C, there was a solenoid used to bump up the RPMs when the A/C was engaged. I replaced the solenoid and connected the black wire to the solenoid wire. The Force Fuel System is easy to connect but youll need to purchase more fuel line, unless you can mount the system close to your existing manual fuel pump. I had to mount mine on the driver side where the charcoal canister was located. I modified the canister bracket to hold the force fuel unit and used the canister return line to connect to the unit. This is not recommended since its a smaller line but since the return connection to the tank was 1/4" I decided to take this easier route for now and hope it doesnt cause any issues later. With the unit on the driver side, I needed additional line to run from the manual fuel pump to the unit. I ran my lines over top of the engine to prevent any damage from being underneath the car and to keep the lines cooler. The only problem I had was priming the fuel system. I was told that it would only take about 3-4 series of turn the pump on for 10 seconds and wait 30. It took me some 30-40 sessions to see fuel come out of the fuel tank return line. After I had the car running I noticed what was probably causing it to take this long to fill the system. I had fuel pouring out of the lines running from the tank to the hard lines. I had to lower the tank and replace these lines. Make sure youre existing fuel lines are in good shape to avoid this problem. The car is running great with a few minor adjustments to the AIC. So far the system and car are running great. Cons: 5 fuel line wasnt enough to connect to pump Pros: Clear instructions Eliminates the need modify the fuel tank/lines Self contained unit installed easily Yes, I recommend this product. I would buy this product again Rated by Southern on November 19, 2019 Summary: I used the n a 1981 corvette Yes, I recommend this product. Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 480 USD

Location: Lincoln, Nebraska

End Time: 2024-07-28T12:02:26.000Z

Shipping Cost: 0 USD