Magpul Short Action Black Stock w/Mag Well For Remington 700 Mag495-BLK + MAG497

Description: PROVIDING SERVICECLICK HERE TO SEE OUR STOREORDER BEFORE 4PM EST FOR SAME DAY SHIPPINGMagpul Short Action Black Stock w/Mag Well For Remington 700 Mag495-BLK + MAG497 The Magpul Hunter 700 Stock for Short Action Remington 700 is crafted from reinforced polymer and an anodized aluminum bedding block. Requiring no bedding, this drop-in stock offers a cost-effective replacement featuring fully adjustable length of pull, comb height, enhanced ergonomics, and M-LOK sections for mounting a broad range of accessories. Compatible with the Magpul Bolt Action Magazine Well which accepts detachable box magazines without the need for custom inletting.NOTE: Fits right-hand receivers only. Factory action mounting screws may vary in length. Custom grinding screws to length or obtaining longer replacements may be necessary to optimize fit with the Hunter 700. All blind floorplate ADL models will require current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well. Not compatible with Remington 700 DM models with proprietary detachable box magazines.Features: Compatible with standard Remington 700 pattern short actions with stock Remington hinged floorplates Upgradeable to detachable AICS-spec magazines Reinforced polymer shell Type III hardcoat anodized A380 cast aluminum V-bedding block Accepts factory Remington barrels Compatible with aftermarket barrel profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech) Tapered beam design 60-degree grip angle from bore axis Adjustable length of pull from 13.0”-15.0” Rubber recoil buttpad included Optional 0.00", 0.50", and 0.75" cheek risers available (pre-fitted with 0.25" riser) Accepts most factory and aftermarket triggers M-LOK slots on forend sides and bottom Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud) Optional Magpul Sling Mount Kit compatible Left and right rear 1-1/4” Footman’s loops Length of pull adjustment range: ~13.0-15.0” Weight: 3 lbs MAGWELL: The Bolt Action Magazine Well is a drop-in solution for the Magpul Remington 700 Hunter Stock for adding detachable box magazines. Installation is simple. Just remove the OEM bottom metal and spacer from the Hunter 700 Stock. Installing the reinforced polymer trigger guard and magazine well does not require custom inletting. Designed to work with AICS pattern, short action magazines. This kit includes one Magpul PMAG 5 7.62 AC.NOTE: Due to variability of receiver dimensions, gunsmithing may be required for optimal fit and functionality. Some triggers, especially those with longer and/or straight trigger bows, may not be compatible without modification to the trigger guard.Features: Designed specifically for the Hunter 700 Stock and all short action caliber AICS pattern magazines Reinforced polymer construction provides durability with light weight Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved triggers Steel action screw pillars Low-profile, anti-snag ambidextrous magazine release is made of Melonite treated steel for wear and corrosion resistance Includes one 5 round 7.62x51/.308 Winchester PMAG 5 7.62 AC magazine Weight: 2.2 oz See our other items Payment ShippingWe accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!We offer FREE SAME DAY SHIPPING on all orders! Must order your item before 5pm est to get same day shipping. Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. If the product is NOT returned in the new and original packaging we will have to charge a restocking fee.100% Authentic ProductsTOP RATEDFast Same Day ShippingThe Magpul Hunter 700 Stock for Short Action Remington 700 is crafted from reinforced polymer and an anodized aluminum bedding block. Requiring no bedding, this drop-in stock offers a cost-effective replacement featuring fully adjustable length of pull, comb height, enhanced ergonomics, and M-LOK sections for mounting a broad range of accessories. Compatible with the Magpul Bolt Action Magazine Well which accepts detachable box magazines without the need for custom inletting. NOTE: Fits right-hand receivers only. Factory action mounting screws may vary in length. Custom grinding screws to length or obtaining longer replacements may be necessary to optimize fit with the Hunter 700. All blind floorplate ADL models will require current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well. Not compatible with Remington 700 DM models with proprietary detachable box magazines. Features: ---Compatible with standard Remington 700 pattern short actions with stock Remington hinged floorplates ---Upgradeable to detachable AICS-spec magazines ---Reinforced polymer shell ---Type III hardcoat anodized A380 cast aluminum V-bedding block ---Accepts factory Remington barrels ---Compatible with aftermarket barrel profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech) ---Tapered beam design ---60-degree grip angle from bore axis ---Adjustable length of pull from 13.0”-15.0” ---Rubber recoil buttpad included ---Optional 0.00", 0.50", and 0.75" cheek risers available (pre-fitted with 0.25" riser) ---Accepts most factory and aftermarket triggers ---M-LOK slots on forend sides and bottom ---Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud) ---Optional Magpul Sling Mount Kit compatible ---Left and right rear 1-1/4” Footman’s loops ---Length of pull adjustment range: ~13.0-15.0” ---Weight: 3 lbs MAGWELL: The Bolt Action Magazine Well is a drop-in solution for the Magpul Remington 700 Hunter Stock for adding detachable box magazines. Installation is simple. Just remove the OEM bottom metal and spacer from the Hunter 700 Stock. Installing the reinforced polymer trigger guard and magazine well does not require custom inletting. Designed to work with AICS pattern, short action magazines. This kit includes one Magpul PMAG 5 7.62 AC. NOTE: Due to variability of receiver dimensions, gunsmithing may be required for optimal fit and functionality. Some triggers, especially those with longer and/or straight trigger bows, may not be compatible without modification to the trigger guard. Features: ---Designed specifically for the Hunter 700 Stock and all short action caliber AICS pattern magazines ---Reinforced polymer construction provides durability with light weight ---Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved triggers ---Steel action screw pillars ---Low-profile, anti-snag ambidextrous magazine release is made of Melonite treated steel for wear and corrosion resistance ---Includes one 5 round 7.62x51/.308 Winchester PMAG 5 7.62 AC magazine ---Weight: 2.2 oz CLICK HERE TO SEE OUR STOREORDER BEFORE 4PM EST FOR SAME DAY SHIPPINGMagpul Short Action Black Stock w/Mag Well For Remington 700 Mag495-BLK + MAG497 The Magpul Hunter 700 Stock for Short Action Remington 700 is crafted from reinforced polymer and an anodized aluminum bedding block. Requiring no bedding, this drop-in stock offers a cost-effective replacement featuring fully adjustable length of pull, comb height, enhanced ergonomics, and M-LOK sections for mounting a broad range of accessories. Compatible with the Magpul Bolt Action Magazine Well which accepts detachable box magazines without the need for custom inletting.NOTE: Fits right-hand receivers only. Factory action mounting screws may vary in length. Custom grinding screws to length or obtaining longer replacements may be necessary to optimize fit with the Hunter 700. All blind floorplate ADL models will require current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well. Not compatible with Remington 700 DM models with proprietary detachable box magazines.Features: Compatible with standard Remington 700 pattern short actions with stock Remington hinged floorplates Upgradeable to detachable AICS-spec magazines Reinforced polymer shell Type III hardcoat anodized A380 cast aluminum V-bedding block Accepts factory Remington barrels Compatible with aftermarket barrel profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech) Tapered beam design 60-degree grip angle from bore axis Adjustable length of pull from 13.0”-15.0” Rubber recoil buttpad included Optional 0.00", 0.50", and 0.75" cheek risers available (pre-fitted with 0.25" riser) Accepts most factory and aftermarket triggers M-LOK slots on forend sides and bottom Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud) Optional Magpul Sling Mount Kit compatible Left and right rear 1-1/4” Footman’s loops Length of pull adjustment range: ~13.0-15.0” Weight: 3 lbs MAGWELL: The Bolt Action Magazine Well is a drop-in solution for the Magpul Remington 700 Hunter Stock for adding detachable box magazines. Installation is simple. Just remove the OEM bottom metal and spacer from the Hunter 700 Stock. Installing the reinforced polymer trigger guard and magazine well does not require custom inletting. Designed to work with AICS pattern, short action magazines. This kit includes one Magpul PMAG 5 7.62 AC.NOTE: Due to variability of receiver dimensions, gunsmithing may be required for optimal fit and functionality. Some triggers, especially those with longer and/or straight trigger bows, may not be compatible without modification to the trigger guard.Features: Designed specifically for the Hunter 700 Stock and all short action caliber AICS pattern magazines Reinforced polymer construction provides durability with light weight Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved triggers Steel action screw pillars Low-profile, anti-snag ambidextrous magazine release is made of Melonite treated steel for wear and corrosion resistance Includes one 5 round 7.62x51/.308 Winchester PMAG 5 7.62 AC magazine Weight: 2.2 oz See our other items Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! ShippingWe offer FREE SAME DAY SHIPPING on all orders! Must order your item before 5pm est to get same day shipping. Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. If the product is NOT returned in the new and original packaging we will have to charge a restocking fee.100% Authentic ProductsTOP RATEDFast Same Day Shipping The Magpul Hunter 700 Stock for Short Action Remington 700 is crafted from reinforced polymer and an anodized aluminum bedding block. Requiring no bedding, this drop-in stock offers a cost-effective replacement featuring fully adjustable length of pull, comb height, enhanced ergonomics, and M-LOK sections for mounting a broad range of accessories. Compatible with the Magpul Bolt Action Magazine Well which accepts detachable box magazines without the need for custom inletting.NOTE: Fits right-hand receivers only. Factory action mounting screws may vary in length. Custom grinding screws to length or obtaining longer replacements may be necessary to optimize fit with the Hunter 700. All blind floorplate ADL models will require current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well. Not compatible with Remington 700 DM models with proprietary detachable box magazines.Features: Compatible with standard Remington 700 pattern short actions with stock Remington hinged floorplates Upgradeable to detachable AICS-spec magazines Reinforced polymer shell Type III hardcoat anodized A380 cast aluminum V-bedding block Accepts factory Remington barrels Compatible with aftermarket barrel profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech) Tapered beam design 60-degree grip angle from bore axis Adjustable length of pull from 13.0”-15.0” Rubber recoil buttpad included Optional 0.00", 0.50", and 0.75" cheek risers available (pre-fitted with 0.25" riser) Accepts most factory and aftermarket triggers M-LOK slots on forend sides and bottom Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud) Optional Magpul Sling Mount Kit compatible Left and right rear 1-1/4” Footman’s loops Length of pull adjustment range: ~13.0-15.0” Weight: 3 lbs MAGWELL: The Bolt Action Magazine Well is a drop-in solution for the Magpul Remington 700 Hunter Stock for adding detachable box magazines. Installation is simple. Just remove the OEM bottom metal and spacer from the Hunter 700 Stock. Installing the reinforced polymer trigger guard and magazine well does not require custom inletting. Designed to work with AICS pattern, short action magazines. This kit includes one Magpul PMAG 5 7.62 AC.NOTE: Due to variability of receiver dimensions, gunsmithing may be required for optimal fit and functionality. Some triggers, especially those with longer and/or straight trigger bows, may not be compatible without modification to the trigger guard.Features: Designed specifically for the Hunter 700 Stock and all short action caliber AICS pattern magazines Reinforced polymer construction provides durability with light weight Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved triggers Steel action screw pillars Low-profile, anti-snag ambidextrous magazine release is made of Melonite treated steel for wear and corrosion resistance Includes one 5 round 7.62x51/.308 Winchester PMAG 5 7.62 AC magazine Weight: 2.2 oz

Price: 269.99 USD

Location: West Palm Beach, Florida

End Time: 2024-10-12T14:34:13.000Z

Shipping Cost: 0 USD