Maxx Model M4A Pro CNC Aluminum Hopup Chamber for Series Airsoft AEG

Description: CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit is precisely machined to perform accurately and consistently on (include , , except ) Standard M AEG series.The Hopup Chamber M4A unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm (6mm are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.The Hopup Chamber M4A unit is designed to accept to nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use.The Hopup Chamber M4A unit is wisely equipped with an interchangeable OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. ( OD11.5mm and OD12mm are optional)Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking to hold the inner barrel tight in place without wobbling and twisting.More than that, the Hopup Chamber M4A Pro unit is specially designed with a new BB Latching System to prevent BB dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber.***The Dual UV LED Tracer Module is an add-on option to glow BB in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!FeaturesMachined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durabilityPerformed accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M AEG seriesPrecision Rotary Dial Knob for fine hopup adjustmentsRe-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shotRemovable Steel Pivot Pin for ease of setup and maintenanceAccepted 21.00mm to 21.25mm nozzle lengthFully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during useWisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately)Mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slotsIncluded an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twistingEquipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during useSpecially designed with a new BB Latching System to prevent BB dropping after removing the magazineThe Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamberCompatible with any 11mm inner bore AEG Gearbox/HPA Engine nozzle outletsThe Dual UV LED Tracer Module to glow BB in the dark ready! Includes1 x CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit2 x CNC Acrylic Side Cover2 x CNC Brass 2.5mm Side Wing1 x CNC Steel Pivot Pin1 x CNC Aluminum Hopup Lever1 x CNC Aluminum Soft Round Nub1 x CNC Aluminum Soft Flat Nub (4mm)1 x CNC Aluminum Hard Concave Nub (4mm)3 x Steel Nub Spring1 x CNC Steel Spring Guide1 x Steel Upper Compression Spring1 x Steel Center Compression Spring1 x CNC Delrin Locking C-Clip1 x CNC Brass Barrel Spacer1 x Brass Barrel Spacer Holder Oring1 x CNC Aluminum Rotary Dial Knob1 x CNC Aluminum Inlet Adaptor (OD11mm)1 x CNC Brass Inlet Spacer

Price: 79 USD

Location: Clover, South Carolina

End Time: 2024-03-24T21:15:14.000Z

Shipping Cost: 0 USD