USB Type C PD Voltage Trigger Test Module 9V 12V 20V Adjustable 5A 100W E-Mark

Description: Power all kinds of electronic devices with USB-C PD chargers and power banks • Test power supply capabilitiesPerforms real PD power negotiation • Supports up to 5A / 100W • Has the e-Mark chip necessary to unlock 5A output on 100W power suppliesTrigger 5V, 9V, 12V, 15V, or 20V output (not all USB-C power supplies support all voltages) • The module just performs the PD negotiation and passes the outputLED voltage indicators • Retains setting after power lossPower supply must be connected to the male end of the moduleInstructions: • USB-C power supply must support the PD protocol • Basic operation: Connect the module to USB-C PD power supply. The LED indicates the current voltage. If no LED is illuminated then it is currently at 5V. While holding S+ press S- to unlock the board. Press S+ to increase voltage. Press S- to decrease voltage. • Reset to 5V: Press and hold the S- button while connecting the module to the power supply • Quick key unlock: After powering on, while holding S+, quick press S- • Quick key lock: After powering on, while holding S-, quick press S+ • Permanent Key Lock: Press and hold the S+ button while connecting the module to the power supply. Press S+ or S- to enable or disable the key lock. If the key lock is enabled, then the voltage cannot be changed until it is unlocked. • Test Mode: Press and hold S- and S+ simultaneously while connecting the module to the power supply. The output voltage will automatically cycle between all supported voltages. Orders under $10 ship without tracking If you need tracking on orders under $10 then pay the extra $1.99 for package service Freight Forwarders, US Territories (except PR), APO, and FPO: Orders under $10 will be canceled unless the $1.99 shipping option is selected at checkout

Price: 4.59 USD

Location: Indianapolis, Indiana

End Time: 2024-11-19T19:30:21.000Z

Shipping Cost: N/A USD